home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Over 1,000 Windows 95 Programs
/
Over 1000 Windows 95 Programs (Microforum) (Disc 1).iso
/
0071
/
vendinfo.diz
< prev
Wrap
VENDINFO
|
1997-03-23
|
12KB
|
247 lines
+-------------------------------------------────────-----────────----+
| This VENDINFO Product Information File contains both readable text |
| and tools-accessible data about a product. See the last text |
| section, below, for more information about VENDINFO and its tools. |
+--------------------------------------------------------------------+
VENDINFO standard v1.04, produced by VendEdit v1.30, 8-Mar-1997
===== Product Information ==============================
Product: Registration Manager Express Automatic registration program
Version: 3.5
Version Date: 23-Feb-1997
Product Type: Software
Basic Distribution Policy (see License, below, for details):
Shareware, subject to distribution restrictions
Product Description: Registration Manager Express is an automatic
registration program. "Try Before You Buy"
features for software authors, distributors,
vendors: > uses Remote Control user
registration techniques. > NO CHANGE to the
source code required. > you can prohibit the
unlicensed copying ofyour software.
Reason for version: "Try Before You Buy" features for software
authors
Category: Utilities; Security programs
Keywords: Registration Protection Distribution Piracy
License Security
Required Packages: EXPRSS
This Package: EXPRSS
Registration Fee: 99.00-114.00 (USA dollars)
Orders:
Address: StanBrite Software
4337 South 785 East
Salt Lake City, UT 84107
Toll-Free Phone: 1-800-650-8304
Phone: 801-265-2927
FAX: 801-265-8859
CompuServe: 72723,1157
Internet: sb.sales@stanbrite.com
Other E-mail: stanl@stanbrite.com
Support:
Address: StanBrite Software
4337 South 785 East
Salt Lake City, UT 84107
Phone: 801-265-2927
FAX: 801-265-8859
CompuServe: 72723,1157
Internet: sb.support@stanbrite.com
===== Information for Users ("READ-ME") ================
Registration Manager (tm) Express v3.5 is an automatic registration
program.
"Try Before You buy" features for software authors, distributors and
vendors.
Registration Manager Express:
> uses Remote Control user registration techniques.
> works for Windows 95, NT, 3.1 and DOS applications.
> NO CNANGE to the source code required.
> you can set "number of runs" limit and date limits.
> you can prohibit the unlicensed copying of your software.
===== Packing List =====================================
As released by the author or publisher, this package contained the
following files in addition to this VENDINFO.DIZ:
Filename Size Date Time CRC32
READ_ME.1ST 171 23-Feb-1997 03:50a F9D97F00
READ_ME.BAT 440 23-Feb-1997 03:50a 0979F95F
FILE_ID.DIZ 308 23-Feb-1997 03:50a A04AA448
VENDOR.DOC 216 23-Feb-1997 03:50a 13796CEE
VENDOR.TXT 216 23-Feb-1997 03:50a 13796CEE
===== Installation =====================================
The installation procedure for Registratiion Manager Express is quite
simple. The package includes a program, "INSTALL.EXE", which automates
the entire process. You will need about 5 Mb of available disk
space on the hard drive on which you plan to install Registration
Manager Express.
The exact steps you need to take will depend on how you received
Registration Manager Express.
INSTALLING FROM DISKETTES
To install from diskette(s), you need to perform the following steps.
o Place RM Express distribution diskette "Disk 1" in the
appropriate diskette drive.
o Execute the "SETUP.EXE" program on the distribution diskette.
For example, if the distribution diskette is on drive A:, type
the MS-DOS command, "a:setup".
o Follow the instructions presented by the installation program.
You will have a chance to approve installation before any changes
are actually made to the contents of your hard drive. The
program will ask you for a destination directory, and will copy
the RM Express files to that directory. If you received RM Express
on two diskettes, you will need to insert Disk 2 in the diskette
drive when asked to do so. If you so direct it, the installation
program will install executable programs and documentation in
other directories of your choice. It will make no other changes;
specifically, it will not modify your autoexec.bat or config.sys
files.
NOTE:
If you are installing the RM Express for the first time,
please select the Setup Type: "Typical".
INSTALLING FROM A HARD DRIVE
If you downloaded RM Express from a BBS (or received it in the form of
archive files from some other source), you will need to perform the
following steps.
o Extract the contents of the archive file(s) in a temporary
directory on your hard drive. The procedure for doing this
varies, depending on the form in which you received the package.
In all likelihood, the fact that you are reading this text means
that you already have the necessary tools and knowledge to
perform this step. If not, you should be able to obtain
directions for this from the same source from which you received
the package.
o Execute the "SETUP.EXE" program which you have extracted. For
example, if the temporary directory into which you have extracted
the <product> package is C:\TEMPDIR, you would execute the MS-DOS
command, "c:\tempdir\setup".
o Follow the instructions presented by the installation program.
You will have a chance to approve installation before any changes
are actually made to the contents of your hard drive. The
program will ask you for a destination directory, and will copy
the <product> files to that directory. If you so direct it, the
installation program will install executable programs and
documentation in other directories of your choice. It will make
no other changes; specifically, it will not modify your
autoexec.bat or config.sys files.
NOTE:
If you are installing this program for the first time, please
select the Setup Type: "Typical".
When you're satisfied that the installation was successful, you should
delete the temporary directory FROM which you installed <product>
(C:\TEMPDIR, in the above discussion), including all its contents.
YOU'RE READY TO GO
Once you've complete the installation, you should consult the help file
EXPRESS.HLP which have been installed. In particular,
read at least the "How it works..." section of the file "EXPRESS.HLP".
That help file will tell you how to invoke the program,
and will give you other information you need to properly evaluate
RM Express. We hope you enjoy the program.
NOTE:
The Registration Manager Express requires VB40032.DLL.
===== License for Use and Distribution =================
TRIAL USE LICENSE
Registration Manager Express is NOT a public domain program. It is
copyrighted by StanBrite Software. This software and accompanying
documentation are protected by United States copyright law and also by
international treaty provisions.
StanBrite Software grants you a limited license to use this software
for evaluation purposes for a period not to exceed thirty days. If you
continue using this software after the thirty-day evaluation period,
you MUST make a registration payment to StanBrite Software.
You may not use, copy, rent, lease, sell, modify, decompile,
disassemble, otherwise reverse engineer, or transfer the licensed
program except as provided in this agreement. Any such unauthorized
use shall result in immediate and automatic termination of this license.
All rights not expressly granted here are reserved to StanBrite Software.
LIMITED DISTRIBUTION LICENSE
The following may distribute Registration Manager Express, completely
unaltered, without further permission...; for other cases or to
distribute in modified form, you must consult the attached data record,
which is hereby incorporated by reference. Any distribution satisfying
all the distribution requirements expressed in that data record is hereby
authorized.
Permission to distribute the Registration Manager Express package is not
transferable, assignable, saleable, or franchisable. Each vendor
wishing to distribute the package must independently satisfy the terms
of this limited distribution license.
U.S. Government Information: Use, duplication, or disclosure by the
U.S. Government of the computer software and documentation in this
package shall be subject to the restricted rights applicable to
commercial computer software as set forth in subdivision (b)(3)(ii) of
the Rights in Technical Data and Computer Software clause at
252.227-7013 (DFARS 52.227-7013).
The Contractor/manufacturer is
StanBrite Software
4337 South 785 East
Salt Lake City, UT 84107
StanBrite Software, Inc. may revoke any permissions granted here, by
notifying you in writing. All rights not expressly granted here are
reserved to StanBrite Software, Inc..
===== About VENDINFO Files =============================
Each VENDINFO.DIZ file contains extensive information about a product.
This "human-readable" section is followed by a compressed data record
useable by automated tools. The data record allows BBSes and other
distributors to automate package handling, and provides users with a
wealth of product information. VENDINFO tools (free viewer for users,
free or inexpensive processors for distributors, editors for authors)
are available from many sources, including the originators of VENDINFO:
Rams' Island Software Voice: 303-841-2848 CompuServe: 76244,324
7644 E. Lakecliff Way BBS: 303-841-6269 FidoNet: 1:104/333
Parker, CO 80134-5904 USA FAX: 303-841-6269 RIME: 1235
===== Compressed Data Record Follows ===================
PK